Archives

Manufacturing Expert, Lisa Anderson, Releases eBook Future-Proofing Manufacturing and the Supply Chain Post COVID-19

April 29th, 2020

CLAREMONT, CALIFORNIA – April 29, 2020 –  Manufacturing and Supply Chain Expert,  Lisa Anderson, MBA, CSCP, CLTD, president of LMA Consulting Group Inc., has released, Future-Proofing Manufacturing & the Supply Chain Post COVID-19. This eBook provides insights, advice and experiential value for Manufacturers and their Supply Chains.

 

The importance of the supply chain came into focus as shelter-in-place orders and the COVID-19 epidemic shifted the demand and supply for newly deemed essential items. “Manufacturers have long understood the intricacies of the supply chain.  What has recently emerged is the key role that the supply chain plays in every aspect of a business.  From sourcing strategies and managing supplier and logistics partner relations to proactively forecasting demand and managing customer service and inventory expectations, the end-to-end supply chain is much than production or operations.  A wrinkle in the supply chain can throw a company off its axis,” commented Ms. Anderson.

“We have been talking about manufacturing and the supply chain being at a critical juncture and the need to become agile, proactive and exponentially innovative.  Little did we know that we would be in the spotlight to meet the challenge under these circumstances. We have seen manufacturers respond to critical needs, like ventilators.  We have seen the supply of toilet paper and other paper goods disappear, highlighting the importance of the supply chain.  We are already seeing manufacturers building a new framework to future-proof their supply chains for the future.  This experience, while sometimes painful, has provided trial by fire and a means to step ahead for a different future,” Ms. Anderson said.  LMA Consulting Group works with manufacturers and distributors on strategy and end-to-end supply chain transformation to maximize the customer experience and enable profitable, scalable, dramatic business growth.

Future-Proofing Manufacturing & the Supply Chain Post COVID-19 provides practical go-forward business concepts than can be applied to any manufacturer, distribution or supply chain organization.

Ms. Anderson is an active member of the Inland Empire Economic Partnership, was recently appointed to the Department of Commerce, District Export Council of the Inland Empire and is sought out by organizations such as Oracle for her manufacturing and supply chain insights. Future-Proofing Manufacturing & the Supply Chain Post COVID-19 can be downloaded here.

 About LMA Consulting Group – Lisa Anderson, MBA, CSCP, CLTD

Lisa Anderson is the founder and president of LMA Consulting Group, Inc., a consulting firm that specializes in manufacturing strategy and end-to-end supply chain transformation.  She focuses on maximizing the customer experience and enabling profitable, scalable, dramatic business growth. Ms. Anderson is a recognized Supply Chain thought leader by SelectHub, named a Top 40 B2B Tech Influencer by arketi group, 50 ERP Influencer by Washington-Frank, a top 46 most influential in Supply Chain by SAP and named a top woman influencer by Solutions Review. She recently published, I’ve Been Thinking, 101 strategies for creating bold customer promises and profits. A regular content contributor on topics including a superior customer experience with SIOP, advancing innovation and making the supply chain resilient, Ms. Anderson is regularly interviewed and quoted by publications such as Industry Week, tED magazine and the Wall Street Journal.  For information, to sign up for her Profit Through PeopleTM Newsletter or for a copy of her book, visit LMA-ConsultingGroup.com.
###


Media Contact
Kathleen McEntee | Kathleen McEntee & Associates, Ltd. | p. (760) 262 – 4080 | KMcEntee@KMcEnteeAssoc.com



Demand & Supply Are Out of Whack!

April 27th, 2020

Demand and supply are out of whack to say the least. Manufacturers that supply toilet paper, food, healthcare products and other essential goods are seeing a surge in demand whereas those that don’t are seeing demand plummet. China was under lock down previously (causing a delay in the pipeline), and they are now operating around 80-90%; however, now we are under lock down. Retail sales are non-existent, and so the warehouses are full of the wrong products. Thus, inventory and transportation assets are typically in the wrong place at the wrong time in the wrong quantity. Watch my webinar on just this topic to learn more…

What Should We Consider and/or What Impacts Could Arise? It will not be business as usual as you ramp back up. Be vigilant in staying on top of what is happening and how quickly you can turn the dial to ramp back up. If you go too fast, you could get your supply chain further out of whack and anger customers. On the other hand, if you ramp up too slowly, not only will you lose money but you will also see your competition speed by. Instead, be proactive prior to the end of the shutdown to start things in motion, pay close attention to what’s happening and adjust accordingly. Stay tuned for my eBook,  Future-Proofing Manufacturing & Supply Chain Post COVID-19 

Please share your stories, challenges, ideas and successes. Contact us and please join in our free webinar series and listen to our archives.

 



Quoted in Direct Relief About When Supply Chain and Human Behavior Converge

April 23rd, 2020

I talked with the Direct Relief about the global supply chain during the pandemic. We discussed the issues of hoarding, the impacts on the global supply chain and what could be done to realign the supply chain so that consumers had what they needed where they needed it when they needed it. Of course, the question also goes back to the word ‘need’ and how to proactively manage panic buying as well as quickly ramp up the supply chain to respond. I am excited to be quoted in their article “Global Supply Chains and Human Behavior Converge During COVID-19 Pandemic”. Read the article here.

For additional coronavirus information, resources and strategies, please visit the coronavirus resources section of our website.

 



The Economy & Where It Is Headed

April 20th, 2020

Since I dressed up for my webinar with Eileen Angulo on “Navigating Coronavirus Impact with our Employees,” it seemed a great time to do a quick video for I’ve Been Thinking on the economy and where we go from here. 

One Tip to Implement This Week:As I said in the video, consider how you can help. Turn your focus from panic and worry to creativity and innovation. Focusing on innovation is the best path forward if we’d like to turn our situations toward the positive, and it is certainly is what will turn the U.S. towards a positive future. Anyone can innovate. Perhaps we aren’t all as skilled as MacGyver in utilizing pencils and paper clips but we each have unique talents and capabilities. Spend an hour focused on innovation and let me know how it goes. To learn more about innovation,

Stay safe and healthy. We continue to post coronavirus resources, write blog articles on navigating coronavirus as well as “beyond lockdown” strategies, and we are sponsoring APICS Inland Empire‘s “Navigating Through Volatility” webinar series. Join us and learn more here. As an executive director of SAC, we are also hosting a “Thriving Through Ambiguity” webinar series with a nominal fee for non-SAC members. Let us know if you have topics you’d like addressed. We would love your feedback.



The Digital Transformation

April 14th, 2020
I’ll be talking more and more about the digital transformation as it will impact every client in a substantial way. Recently I met with a significant, regional CPA firm’s manufacturing and technology experts. We saved time to discuss thought leadership ideas which of course crossed over into the digital transformation. What a fun conversation! A few of the topics that arose included:
  • Artificial Intelligence – it certainly has the power to transform entire industries. If that alone doesn’t prompt you to pay attention, it seems like the attractiveness of predictable demand just might. There are vast implications for the supply chain. Our 2020 predictions document will discuss this further.
  • Internet of Things – we have embraced the internet of things in our personal lives with step counters, Apple watches, self-adjusting cars, and more. There is definitely ample opportunity in manufacturing and supply chain as well. Think of tracking shipments with GPS, monitoring storage conditions of products to name a few.
  • Blockchain – although all reports are that there is a long way to go and it will require a collaborative effort, the big firms are dumping money into blockchain, it came up in our 2020 predictions and seems to be hailed as transformative. Thus stay alert!
  • Additive Manufacturing  – Who cares about all these sourcing decisions with lengthy lead times (causing cash flow delays), risks of IP and trade secret theft, and hidden costs and burdens related to a BUNCH of factors out of our control if we can produce customized product on demand next to our customers?
  • Physical Internet –  As a part of my role with the consortium for advanced manufacturing and logistics success as a part of IEGO, I am reminded of the importance of the physical internet. GA Tech’s research is quite intriguing. It combines many of the concepts into a way to share infrastructure such as freight and warehouses.
I’ll be doing interviews on these topics and more as part of my new video series so that our clients can stay AHEAD of the curve.